Infraraudonųjų spindulių termometras chemija pramonė taikymas
In the petrochemical industry, refineries employy temperature display systems as part of routine preventive maintenance programs. These procedures include monitoring of the furnace process and verification of thermocouple readings. In the detection of furnace process, infrared display is used to detect the proportion of carbon accupulation in the heating surface tube. Šis buildup, known as coking, results in a higher firing rate of the furnace, which also increase the temperature of the tubes. This high temperature condition will reduce the life of the tube. Because this coking will prevent the product from absorbing the heat of the pipe tolygiai. When use an infrared thermometer, we will find that the surface temperature of the tube in the junction area tends to be higher nei kad in kitos sritys.
The operating principle guidance of the two-color fixed thermometer can also play a role in preventive maintenance:
With a portable thermal display system, maintenance personnel can identify potential or existing problems. Examples: Overheated engine coil windings, plugged cooling fins on transformers, capacitor contacts, heat buildup in compressor cylinder head. Any problem is accompanied by a temperature rise, or a temperature curve that is sharply different from the surround temperature, so that it can located with a portable thermal display system. In most cases, the problem can be found in time and corrected in time before the process is required to be stop.
Taikymas infraraudonųjų spindulių termometras plastikas pramonė
In the plastics industry, infraraudonųjų spindulių termometrai are naudojamas to vengti produktas užterštumas, matas dinaminis objektai ir matas aukšta temperatūra plastikai. Temperatūra matavimai to reguliuoti šildymui ir aušinimas perpūsti plėvelė ekstruzija gali pagalba išlaikyti the integrity of the plastic's tension and its storis. During ejection of cast film, sensors help control temperature to ensure product storis and konsistencija. Per lakštas ekstruzija, jutikliai leisti the operatorius to reguliuoti the šildytuvai ir šaltos ritės to be išjungta išjungta to išlaikyti produktas kokybė.
